Industry

Industry

This list of products provides an entire line of applications for the segment of:

Industry

For the exact application and recommendation of the lubricating oil contact us on tech.serv@oman-lubricants.nl.
It is also possible to require a lubrication schedule based on brand and producttype.

INDUSTRIAL GEAR OIL 68/150/220/320

Product: 216380/ 216390/ 216400/ 216450

O.E.M.: Industrial Gear oil is approved by David Brown Industries Ltd., PIV and SEW Usocome and meet the requirements of the technical demands of DIN 51517 part 3, AGMA 250.04 and US Steel 224.

Packaging:  Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr

Productdescription

OMAN Gear Oil series are high performance gear oils intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are particularly suitable for gear sets working under heavy or shock loads. Due to their friction-modifying characteristics they reduce power consumption and lower bulk oil temperatures.

Application

OMAN's industial gears oils are designed to provide optimum-equipment and oil life even under extreme conditions. They are especially formulated to resist micropitting of modern,case hardened gearing and applications where extended oil life is desired. Typical applications include: wind turbines, plastic extruder gearboxes,gearboxes found in the paper,steel,oil,textile,lumber and cement industries.

OMAN WAY OIL 68_200

Product: 424800

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

WAY OIL is an universal lubricant for the use of tools, based on mineral oil on which additives have been added to aquire the following additives:

Application

OMAN's industial gears oils are designed to provide optimum-equipment and oil life even under extreme conditions. They are especially formulated to resist micropitting of modern,case hardened gearing and applications where extended oil life is desired. Typical applications include: wind turbines, plastic extruder gearboxes,gearboxes found in the paper,steel,oil,textile,lumber and cement industries.

- Resistent against high pressure and loads.

- Very strong attachment to metals.

- Very high anti-slib power.

- Very high anti-wear,-corrosion and –foam power.

HEATH TRANSFER OIL

Product: 130300

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

OMAN MarineGuard Heath Transfer Oil is an oil especially for heath transport systems.It distinguishes by is high thermal stability, low viscosity in the entire area of application and great protection against corrosion.

Application

The large capacitance against thermal cracking prevents precipitate shaping, thanks to which the systems stay clean and a long life span of the oil is ensured. Thanks to the low viscosity on companytemperature the heath transfer value is high and the capacitance in the piping is low. Thanks to a high boilingpoint at starters the systems can work pressureles until the maximum temperature is achieved. No unpleasant smell and corrosion is prevented.

COMPRESSOR OIL

Product: 412200

O.E.M.: VDL norm according to DIN 51506

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

COMPRESSOR OIL is a compressor oil made of highly refined base oils and additives to prevent oxidation, corrosion and foaming. It meets the strict requirements of the PNEUROP-oxidation test.

Application

COMPRESSOR OIL is particularly recommended for the lubrication of both piston-and screw- compressors operating at high temperatures. May also be used when an oil according to the DIN classification VDL is required. Also suitable for use in vacuum-pumps.

TURBINE OIL

Product: 410410

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

OMAN Turbine Oil are created out of specially refined base oils, which have a natural high viscosity index. These base oils are prepared with anti-oxidation and anti-rust additives, to achieve a long life span. 

Application

Turbine for gas- and steamturbines,waterturbines, cog wheels, compressors andvacuümpomps.

METAL WF 46

Product: 440000

O.E.M.: Herbert Corrosiontest IP 125 (10%): 0/0-0

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

OMAN METAL WF 46 is a high quality metal working fluid, produced with the greatest care and quality base oils and additives. OMAN METAL WF 46 is a emulsifying fluid which after mixing with water obtaines the following properties:

- Good stability of the emulsion

- Good protection against corrosion

- Good resistance against micro organisms

- Low foaming characteristics

Application

Add 1 part OMAN METAL WF 46 to 9 parts water (in general 10% emulsion) while stirring  thoroughly, to obtain a very stable emulsion for machining all normal metals. After a certain time and in certain conditions it can be necessary to add an extra bactericide to the system.

 

MOULD OIL EM (EMULSIFIABLE)

Product: 440240

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

OMAN MOULD OIL EM is utterly suitable for the concrete industry and for house-,bridge- or tunnel building activities. This MOULD OIL EM  forms a so called oil in water emulsion, which has an especially selected limited stability. Once it is brought on the form work, the emulsion will soon break which increases its activity.

Application

The usual mix proportion for these MOULD OIL EM is 1 part on 9 parts of water. It is important that the oil is supplemented to the water and not vice versa. This MOULD OIL EM is used on non-coated form work. If this form work is used for the first time, or whenever it is very dry, water or emulsion is to be used several times to prevent poor hydratation of the concrete skin. If the produced emulsion after a while starts to show a yellow oil layer, one is to stir it once more (thoroughly).

 

MOULD OIL NON EM (NOT EMULSIFIABLE)

Product: 440250

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

OMAN MOULD OIL non EM is made from a high rifined base fluid and an brief fluid,at which non-toxic surface active fluids and anti-corrosion products are added. The MOUlD OIL NON EM has (together with the ''bleedingwater'' from concrete specie) the effect of  making a low border area tension, which creates a smooth concrete surface.

Application

OMAN MOULD OIL non EM is approved for steel and coated wooden formworks in the concrete sector and industry just a thin layer is required to get the best result:

Coated multiplex:                     1 liter for 30-40 m² 

Steel and other metals:            1 liter for 40-50 m²

After application with a brush remove the redundant parts of the product on its application.

FLUSHING OIL

Product: 100000

Packaging: Bulk, IBC 1000ltr, 208ltr, 60ltr, 20ltr,

Productdescription

OMAN Flushing Oil exists from a mineral base oil with minimum additives.

Application

Its main application is the flushing/cleaning of polluted systems.